Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!ucsd!ucsdhub!hp-sdd!ncr-sd!tw-rnd!johnl
From: johnl@tw-rnd.SanDiego.NCR.COM (John Lindwall)
Newsgroups: comp.sys.amiga
Subject: Supra 4x4 cable (NEED HELP)
Keywords: supra 4x4 scsi cable oo-ee oo-ah-ah
Message-ID: <453@tw-rnd.SanDiego.NCR.COM>
Date: 26 Jul 89 16:11:15 GMT
Organization: NCR Distributed Systems Laboratory
Lines: 25


	Well folks, its taken me months of scrimping, saving, and planning
	but I finally have my A1000 hard disk system coming together.

	I have the Supra 4x4 SCSI interface, and external case/power supply,
	and a Quantum 80S on the way from HardDisk Intl ($750).  My last
	hurdle is the creation/purchase of the cable to connect the drive
	to the controller.

	The 4x4 comes with a cable that hooks onto a 25 pin connector on
	the rear of the unit.  This cable leads to a small circuit board
	which  they call the "connector board".  I need the cable to connect
	the 50 pin connector on the "connector board" to the drive.

	Does anyone know the correct pinouts for this 50 pin cable?
	Alternately, can I purchase the appropriate cable from somewhere?

	[I don't believe this 50 pin connector is a typical type of SCSI
	 connector. It is not a DB connector, but two parallel rows of 
	 25 pins. (sorry I don't know the tech name)]

	 Thanks!

	 John Lindwall
	 johnl@tw-rnd.SanDiego.NCR.COM