Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!haven!purdue!decwrl!shlump.dec.com!mountn.dec.com!wjg.dec.com!guineau
From: guineau@wjg.dec.com
Newsgroups: comp.sys.amiga.tech
Subject: Problems adding SCSI drive to A2500 - oops
Message-ID: <455@mountn.dec.com>
Date: 20 Jul 89 12:35:31 GMT
Sender: news@mountn.dec.com
Organization: Digital Equipment Corporation
Lines: 29


Oops, forgot to include a typical entry from my mountlist:

FH2:
	Device = hddisk.device
	Unit = 3
	Flags = 0
	Surfaces = 6
	BlocksPerTrack = 33
	FileSystem = l:FastFileSystem
	Reserved = 2
	LowCyl = 0 ; HighCyl = 300
	Buffers = 30
	Globvec = -1
	Mount = 1
	BufMemType = 0
	Stacksize = 5000
	DosType = 0x444F5301
#

NOTES:
	All others look like this except the next starts at cyl 301 etc.
	I did have LowCyl = 2 and used PREP with same results. With LowCyl = 0
		I skip PREP (To no have to use an old FS partition)
	I tried Globvec = 1 and = -1 (since I've seen both used)

Where is hddisk.device? Must be in 2090a ROM?

John