Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!apple!motcsd!hpda!hpcupt1!hpindwa!tribby
From: tribby@hpindwa.HP.COM (David Tribby)
Newsgroups: comp.sys.apple
Subject: GSBug Questions
Message-ID: <36410002@hpindwa.HP.COM>
Date: 18 Jul 89 17:24:47 GMT
Organization: HP Information Networks Group/Cupertino CA
Lines: 24

Several comp.sys.apple readers were helpful the last time I had a GSBug
question, so here are a couple more...

1. Is there any way to set a "real time" breakpoint for a toolset call?
   Since I do most of my programming in TML Pascal, I would like to set
   a breakpoint on a particular toolset call, then let the program run
   in real time until the invocation.

2. Does the "init" version of GSBug interfere with the "run time" version?
   I have the init version enabled at startup, and sometimes peculiar
   things happen when I invoke the run-time version and try to load & debug.
   For example, I loaded my program, then tried to invoke the loader/dumper
   CDA to get the seqment addresses. When I pressed OA/Ctrl/esc, the display
   froze (the cursor quit blinking and no characters echoed on the screen).
   Things seemed to start working again when I pressed the option key (by
   itself), but it turned out I had invoked the init version of GSBug! I
   Restored from the init version, then could work with my program in the
   run-time GSBug.

Thanks in advance for any help!

--Dave Tribby
                                   - - - - -
        ARPA: tribby%hpda@hplabs.HP.COM   UUCP: hplabs!hpda!tribby