Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!cica!tut.cis.ohio-state.edu!navajo.cis.ohio-state.edu!stern
From: stern@navajo.cis.ohio-state.edu (jeffrey a stern)
Newsgroups: comp.sys.apple
Subject: Re: IS KERMIT3.85 USABLE WITH A GS?
Message-ID: <55485@tut.cis.ohio-state.edu>
Date: 19 Jul 89 21:24:24 GMT
References: <8907191342.aa12541@SMOKE.BRL.MIL>
Sender: news@tut.cis.ohio-state.edu
Reply-To: jeffrey a stern <stern@cis.ohio-state.edu>
Organization: Ohio State University Computer and Information Science
Lines: 19

In article <8907191342.aa12541@SMOKE.BRL.MIL> 
RXBROWN@UALR.BITNET ("MR.FANTASTIC") writes:

>>Kermit 3.85 won't accept input from the GS keyboard........
>
> Jeff,
>  I beleive you will have to build Kermit on your GS. Go back through the
>process of execing it but set everything up for the GS. If you have the
>.Install file you can just exec it on your GS and set everything accordingly.
>
>Robert Brown

Thanks, Bob.  I think I will try this.  I noticed that I am using the Super
Serial card hex code, and was going to try to rebuild Kermit with the GS port
code.  --Jeff Stern
-=-
stern@cis.ohio-state.edu: Internet | "Eppur si muove."       |
osu-cis!tut!stern       : UUCP     |         -Galileo    |:->{===#
                                   |                     `   /