Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!winnie!zach!acs60222
From: acs60222@zach.fit.edu ( ENRIQUEZ)
Newsgroups: comp.sys.atari.st
Subject: Re: adding memory to 1040ST
Message-ID: <541@winnie.fit.edu>
Date: 21 Jul 89 19:18:06 GMT
References: <698@lzaz.ATT.COM>
Sender: usenet@winnie.fit.edu
Reply-To: acs60222@zach.UUCP ( ENRIQUEZ)
Organization: Florida Institute of Technology, ACS, Melbourne, FL
Lines: 21

>From Xerox.COM!"Paul_Millard.WGCERX"  Paul writes:
>
>**************************************************************
>2. my second atari is a 520ST with a 1 meg upgrade.  each chip has
>piggybacked on it a second 25k dram.  All pins are soldered except for the
>chip select. It works, and there are no connectors to work loose like my
>ezram.
>**************************************************************

Having (finally) decided to upgrade to 1M,  all that remains for me
to do is pick the method in which to do this.  The above mentioned 
solution seems promising (i.e. inexpensive) and I would like, if possible,
a more detailed description of the process of piggybacking(?) the
drams.

Since I am no expert (but learning :-) on this sort of thing, perhaps
one kind soul could mail me either a reference or "walk-through" instructions
on the installation of the drams.

thanks      mark enriquez       
            acs60222@zach.UUCP