Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!DBSTU1.BITNET!I2060203
From: I2060203@DBSTU1.BITNET
Newsgroups: comp.sys.atari.st
Subject: boot problem with Seagate ST 157N
Message-ID: <8907241009.AA29930@ucbvax.Berkeley.EDU>
Date: 24 Jul 89 10:09:12 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 21
X-Unparsable-Date: Mon, 24 Jul 89 12:04:26 MEZ

Date: 24 July 1989, 12:02:31 MEZ
From: I2060203 at DBSTU1
To:   info-atari16 at score.stanford

Subject: boot problem with Seagate ST 157 N

Hello Netlanders,
we have a problem booting from a Seagate ST 157N Hard Drive (with SCSI on
board) connected to the ST with an original SH 204 Host Adaptor.
Everything works right, if we start the AHDI Driver (Vers. 1.7) from Floppy,
but the system refuses to read the boot sector on startup from the HD (TOS
Vers. 1.4). Are there any differences between the DMA-read in the boot-code
and in the driver? We tried both HDINSTALL and HDBOOT.
Thanks for any advice]

##########################################################################
Joerg Theuerkauf                                 I2060203 at DBSTU1.BITNET
Inst. f. Geophysik & Meteorologie
Mendelssohnstr. 3
3300 Braunschweig
Tel. 0531 391 5236