Xref: utzoo comp.unix.ultrix:1241 comp.sys.dec:1531
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!zephyr.ens.tek.com!tektronix!gvgpsa!davew
From: davew@gvgpsa.GVG.TEK.COM (David C. White)
Newsgroups: comp.unix.ultrix,comp.sys.dec
Subject: Re: UUCP through terminal server under ULTRIX
Message-ID: <1218@gvgpsa.GVG.TEK.COM>
Date: 21 Jul 89 04:21:40 GMT
References: <1488@ndmath.UUCP>
Reply-To: davew@gvgpsa.gvg.tek.com (David C. White)
Organization: Grass Valley Group, Grass Valley, CA
Lines: 18

In article <1488@ndmath.UUCP> milo@ndmath.UUCP (Greg Corson) writes:
>On a DEC ultrix computer, either a DECstation (mips based) or
>VAX (CVAX based) is it possible to run UUCP both dial in and
>dial out through a serial port on a DEC terminal server?

I would like to hear an answer to this also.  The question was asked
once before here about problems with protocol based file transfers
through a terminal server, but I never saw or missed the response, if
any.  I have tried X/YMODEM with a direct connect line and UUCP
through both a modem and direct lines through a DECserver 200 with no
success.  I set the port exactly as described in the manual, but no
luck.  I sure would like to know how this is supposed to be done.  It
apparently works under VMS, so I am wondering if it has something to do
with the how the port is set under Ultrix.
-- 
David White	Grass Valley Group, Inc.   VOICE: +1 916.478.3052
P.O. Box 1114  	Grass Valley, CA  95945    FAX: +1 916.478.3778
Internet: davew@gvgpsa.gvg.tek.com     UUCP:  ...!tektronix!gvgpsa!davew