Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!husc6!rice!sun-spots-request
From: keduke@athena.mit.edu
Newsgroups: comp.sys.sun
Subject: Question about CMU-TEK TCP/IP
Keywords: Networks
Message-ID: <385@brazos.Rice.edu>
Date: 26 Jul 89 03:15:11 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 20
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 85, message 5 of 8

Hi everyone....

I have a question for you

I have a VAX750 running VMS 4.6 AND CMU-TEK TCP/IP v6.3 here in BOSTON and
I have a microVAX II running VMS 4.6 AND CMU-TEK TCP/IP v6.3 in SLC.  The
two vax systems communicate over a leased line running at an unbelievable
speed of 9600 baud!  Each vax is on an ethernet filled with SUN's which
are dying to communicate with one another.   

Question:   Is it possible to configure the CMU software in such a way as
to do IP routing over the modem?  Is this even technically possible?  I
have heard of SLIP software (running TCP/IP over asynch lines) is this
what I need?

I would appreciate your comments or names of people who have the CMU
software.  Thanks in advance.

Kerry Duke
keduke@athene.mit.edu