Xref: utzoo news.sysadmin:2562 comp.dcom.modems:4140 comp.unix.questions:14920 comp.unix.xenix:6704
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!agate!ucbvax!tut.cis.ohio-state.edu!cwjcc!hal!ncoast!fmsystm!macy
From: macy@fmsystm.UUCP (Macy Hallock)
Newsgroups: news.sysadmin,comp.dcom.modems,comp.unix.questions,comp.unix.xenix,comp.unix.i386
Subject: Re: How to speed up uucp with Telebits(only get 9600 out of 386)
Summary: Need simple way to get 19,200 serial port on 386
Keywords: serial 80386 telebit 19,200
Message-ID: <14@fmsystm.UUCP>
Date: 14 Jul 89 04:40:39 GMT
Expires: 14 Aug 89 23:00:00 GMT
References: <200038@hrc.UUCP> <1160@intercon.UUCP> <1989Jul8.042330.19789@wobble.uucp> <37631@sgi.SGI.COM>
Reply-To: fmsystm!macy@NCoast.ORG (Macy Hallock)
Distribution: usa
Organization: F M Systems  Medina, Ohio USA
Lines: 22

In following all this discussion about getting better throughput on
Telebit Trailblazers, I'd like to know:

How can I get a simple cheap 19,200 bps serial port on my 80386
running SCO Xenix 2.3.1?

The /etc/gettydef seems to allow only for operation to 9600.
Do I need special hardware?  I am using simple, dumb serial
cards (8250).

What do I need to modify in Xenix?

I have an Anvil Stallion mulitport board in my other (non-news) machine
and it solves the problem nicely, but what can I do on my news machine?

Regards, and thanks in advance to all who reply/post.

Macy Hallock                   fmsystm!macy@NCoast.ORG
F M Systems                    hal!ncoast!fmsystm!macy
150 Highland Dr.               216-723-3000 ext 251 voice, office
Medina, OH 44256               216-722-3053 voice, home 19:00-23:00 EDT
New path under construction:   uunet!aablue!fmsystm!macy  (Thanks JB!)