Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!cica!ctrsol!ginosko!uunet!cs.dal.ca!iotek!garyb
From: garyb@iotek.UUCP (Gary Burrell)
Newsgroups: comp.os.minix
Subject: Re: Minix 1.3 upgrade
Message-ID: <342@venus.iotek.UUCP>
Date: 31 Jul 89 12:46:13 GMT
Reply-To: garyb@iotek.UUCP (Gary R. Burrell)
Followup-To: <340@venus.iotek.UUCP>
Organization: IOTEK Inc
Lines: 38


In article <340@venus.iotek.UUCP> garyb@iotek.UUCP (Gary R. Burrell) writes:
>Well I received my minix 1.3 upgrade disks in the mail from P-H
>yesterday and now I will proceed to install them.  Before I get into
>the installation too deep is there any special tips tricks etc that
>will help me set this system up properly.  I am running on an 8-MHz XT
>with two floppys and a 40 Mb Hd (Miniscribe 3650, WD controller) with
>8Mb devoted to minix (partition 1) 24 M primary DOS 3.3 (part 2) and 8
>mb secondary DOS (partition 3) It currently running under Minix 1.1 to
>be upgraded to Minix 1.3 using the P-H 1.3 upgrade kit.
>
 etc etc etc
>
>
>	Does anyone have the files sys/dir.h sys/timeb.h sys/times.h
>and type.h which I understand are missing from the upgrade disks?
>

Yup, those files are missing or buryed somewhere where I can't find
them.  Can someone send them to me.  I would like to get this upgrade
finished as quick as possible so I can get down to some serious
MINIXing.

		Thanks in advance

			Gary R. Burrell

			<<<<<<******>>>>>>
Gary R. Burrell, Iotek Inc,     |*| E-Mail: garyb@iotek.uucp	|*| 
1127 Barrington St., Suite 100, |*| Fax:    (902)420-0674	|*|   
Halifax, N.S., B3H 2P8, Canada  |*| Phone:  (902)420-1890	|*| 

Damm it Jim 
  I'm a Doctor not a Computer Scientist!
              
             *************************************