Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!pt.cs.cmu.edu!rochester!rit!tropix!moscom!ur-valhalla!uhura.cc.rochester.edu!sunybcs!rutgers!cs.utexas.edu!csd4.milw.wisc.edu!uxc.cso.uiuc.edu!uxc.cso.uiuc.edu!ux1.cso.uiuc.edu!uxe.cso.uiuc.edu!krauskpf
From: krauskpf@uxe.cso.uiuc.edu
Newsgroups: comp.protocols.appletalk
Subject: Re: PC NCSA Telnet on Apple PC-Localtal
Message-ID: <66000035@uxe.cso.uiuc.edu>
Date: 22 Jul 89 21:33:00 GMT
Lines: 19
Nf-ID: #R:<8906162255.AA09415@molecules.ec:-45:uxe.cso.uiuc.edu:66000035:000:611
Nf-From: uxe.cso.uiuc.edu!krauskpf    Jun 17 16:33:00 1989



This is a test version of NCSA Telnet for the PC which supports
the Apple LocalTalk driver.  We are going to be testing on the TOPS
board soon, but I assume it works.  The release 2.3 will be later this
summer.  The rest of the code in this version is identical to v2.2.

Take a standard config.tel file which works on Ethernet or get one from
the 2.2 Ethernet release.  Change/Add the following lines:

hardware=ltalk
interrupt=60       # or appropriate software interrupt for driver


And make sure your appletalk driver is installed and working.  
e.g. can you "see" the laser printer?

Tim Krauskopf
NCSA