Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!purdue!ames!amdahl!rtech!cpsc6a!cpsc6b!crs
From: crs@cpsc6b.cpsc6a.att.com (Chris (Take my Worf, please!) Seaman)
Newsgroups: comp.sys.amiga
Subject: Re: Handshake w/ dMouse problems :^(
Summary: No problems here either.
Message-ID: <625@cpsc6b.cpsc6a.att.com>
Date: 28 Jul 89 17:26:32 GMT
References: <20532@louie.udel.EDU>
Organization: AT&T (CPSC), Oakland, CA
Lines: 23

OHA101%URIACC.BITNET@mitvma.mit.edu (F. Michael Theilig) writes:
< On 25 Jul 89 17:33:51 GMT you said:
< >OHA101%URIACC.BITNET@mitvma.mit.edu (F. Michael Theilig) writes:
< >> Simple problem here: Don't use the lineart handler.
< >
< > If it was only that simple. I have seen the GURU with only the simple
< >blank screen. It's somthing much more complicated.
< >
< >Steve -Raz- Berry

<      I have been using Handshake 2.12a and DMouse 1.07 (sans lineart)
<  for quite a while.  I have had NO PROBLEMS.  There must be a problem
<  with the newer DMouse.  (Matt, this will look real bad to the deity
<  comitte ;-)
<
<      /*   F. Michael Theilig               OHA101 at URIACC.Bitnet

I don't know what the problem might be, but it doesn't show up on my
2500, running dmouse 1.10, Handshake 2.12a, SetCPU 1.5 (with patches
enabled), MyMenu, VirusX 3.2, and DropCloth.  I get no Guru's from
Handshake.  I did get consistent Guru's from dmouse with the lineart
handler when bringing back the screen by pressing a key instead of moving
the mouse (in ANY screen).