Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!cs.utexas.edu!uunet!ccavax!lmrc!hassinger
From: hassinger@lmrc.uucp (Bob Hassinger)
Newsgroups: comp.sys.amiga
Subject: Re: fastmemfirst
Message-ID: <63@lmrc.uucp>
Date: 3 Aug 89 15:55:43 GMT
References: <11353@mcdphx.phx.mcd.mot.com> <477@tardis.Tymnet.COM>
Organization: Liberty Mutual Research Center, Hopkinton, MA
Lines: 8

In article <477@tardis.Tymnet.COM>, jms@tardis.Tymnet.COM (Joe Smith) writes:
...
> FastMemFirst has no effect if you don't have any expansion memory.
> FastMemFirst has no effect if you don't have any memory at C00000 (an A500).

I was under the impression that the 512K A501 internal memory option for the
A500 *was* addressed at C00000 (e.g. slow-fast mem - on chip bus).  Is that
what you where saying or am I wrong?