Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!ucla-cs!uci-ics!zardoz!tgate!ka3ovk!drilex!axiom!linus!mbunix!rachamp
From: rachamp@mbunix.mitre.org (Richard A. Champeaux)
Newsgroups: comp.sys.amiga.tech
Subject: Reactivating the CLI window.
Message-ID: <62198@linus.UUCP>
Date: 2 Aug 89 12:38:57 GMT
Sender: news@linus.UUCP
Reply-To: rachamp@mbunix.mitre.org (Champeaux)
Organization: The MITRE Corporation, Bedford, Mass.
Lines: 14

I've run into a minor, but annoying problem while writing PLT:.  If the
handler is told to output to the screen, it opens a screen and a couple of
windows.  When a close box is clicked, the windows and screen are closed,
and the handler exits.  The only problem is that the CLI window I was using
is no longer selected, I have to click on it.  How do I force the last 
active window, CLI or otherwise, to be active again.  I've also noticed it
happen when I've output to PLT: from IntroCad.

I've been calling PLT: like this:

copy HPGL_file PLT:

Thanks for any help,
Rich Champeaux  (mbunix.mitre.org)