Path: utzoo!censor!geac!jtsv16!uunet!tut.cis.ohio-state.edu!ucbvax!pro-xy.UUCP!jlink
From: jlink@pro-xy.UUCP (John Link)
Newsgroups: comp.sys.apple
Subject: Re: AE Datalink + ModemWorks -- DIP switch settings?
Message-ID: <8908051759.AA11238@obsolete.UUCP>
Date: 5 Aug 89 05:24:17 GMT
Organization: The Internet
Lines: 10

Network Comment: to #40 by obsolete!blake!aragorn%beaver.cs.washington.edu

Your problem is that you have switched the jumpers from the factory standard
setting.  I use a DataLink 2400 with modemworks/proline, and use it EXACTLY
like it comes from the factory.  If you are using PRIME or some other software
that looks for the carrier on the DTR line, THEN you switch the jumpers, which
is equivalent to building a "crossed" cable.  So, I recommend you set it up
just like it came from the factory, if you haven't tried that yet.  (BTW, I do
not change the dipswitches either--nice to have something that you don't have
to change at all to get it to work.)