Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ncar!tank!uwvax!astroatc!brown
From: brown@astroatc.UUCP (Vidiot)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Microsoft Mouse Question
Message-ID: <2482@astroatc.UUCP>
Date: 1 Aug 89 20:40:36 GMT
References: <cYpQ=5y00Uh-A1HX0Z@andrew.cmu.edu>
Reply-To: brown@astroatc.UUCP (Vidiot)
Distribution: na
Organization: Vidiot's Hangout
Lines: 19

In article <cYpQ=5y00Uh-A1HX0Z@andrew.cmu.edu> as2d+@andrew.cmu.edu (Alan Henry Stein) writes:
<
<I have a Microsoft bus mouse which was in a PC clone.  Now, I am moving it
<to an AT clone.  I know I have to reset the jumpers (especially the interrupt
<setting).  Can anyone tell me what the jumpers should be set to?
<
<(There are three set if I remember.  One sets either Primary or Secondary
<inport.  One set the interrupt level. and one sets something else).

Only the interrupt jumper needs to be moved.  Change it from 5 to 2, or from
2 to 5.  I forget which is which, but whatever it is now, you change it to
the other number that I mention.  Whenever I put in the MS bus mouse into
the Compaq machines at where I used to work, I always had to change the
jumper, since it was set for the XT class machine.
-- 
	        harvard\     att!nicmad\
Vidiot            ucbvax!uwvax..........!astroatc!brown
	        rutgers/  decvax!nicmad/
	ARPA/INTERNET: brown%astroatc.UUCP@spool.cs.wisc.edu