Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!rex!ginosko!uunet!microsoft!ingridt
From: ingridt@microsoft.UUCP (Ingrid Tenggren)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Microsoft Mouse Question
Message-ID: <7244@microsoft.UUCP>
Date: 4 Aug 89 21:00:35 GMT
References: <cYpQ=5y00Uh-A1HX0Z@andrew.cmu.edu>
Reply-To: ingridt@microsoft.UUCP (Ingrid Tenggren)
Organization: Microsoft Corp., Redmond WA
Lines: 23

In article <cYpQ=5y00Uh-A1HX0Z@andrew.cmu.edu> as2d+@andrew.cmu.edu (Alan Henry Stein) writes:
>
>I can't find my microsoft mouse documentation, so if you have yours lying
>around, maybe you can help me out.
>
>I have a Microsoft bus mouse which was in a PC clone.  Now, I am moving it
>to an AT clone.  I know I have to reset the jumpers (especially the interrupt
>setting).  Can anyone tell me what the jumpers should be set to?

>thanks,
>alan
Since I updated the last Mouse manual, I spoze I can offer a response:

I recommend you use either pair 5 or 3. Do NOT use 2. I'm assuming you
do not have a Network card of any kind in there; sometimes they have
their own weirdnesses...if you do, then check the documentation for
that card to find out what jumper it likes/doesn't like.



ingrid johanna tenggren
Microsoft's Real Swede
{...uunet!microsof!ingridt}