Path: utzoo!utgpu!watmath!att!pacbell!ames!mailrus!csd4.milw.wisc.edu!cs.utexas.edu!uunet!mcvax!ukc!castle!erci18
From: erci18@castle.ed.ac.uk (A.J Cunningham)
Newsgroups: comp.sys.mac
Subject: NCSA Telnet 2.1e and Tops TCP/IP
Message-ID: <20@castle.ed.ac.uk>
Date: 7 Aug 89 13:04:02 GMT
Reply-To: erci18@castle.ed.ac.uk (A.J Cunningham)
Organization: Edinburgh University Computing Service
Lines: 17


	I have a mac SE and etherport from Kinetics. It came with NCSA
telnet and I got a copy of Tops TCP/IP from a local archive.
Unfortunately none of theseprograms will work at all. Telnet gets as far
as drawing a menu bar then falls over with

ADDR ERR0000001D
00011C: 0027 412E0040	ORI.B #$2E,-(A7).

Tops TCP/IP gets as far as asking me for an IP address and then falls
over with a similar error. The 3Com software that we use in the office
works fine but I need TCP/IP as the builders left me without a serial
port.
	Does anybody know what's going wrong?

		Tony Cunningham
"If the thunder don't get you then the lightnin' will."