Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!lll-winken!uunet!pdn!boake2!scott
From: scott@boake2.UUCP (Scott Boake)
Newsgroups: comp.unix.xenix
Subject: SCO TCP/IP
Keywords: lockup
Message-ID: <271@boake2.UUCP>
Date: 2 Aug 89 04:21:30 GMT
Organization: Small Systems Consulting
Lines: 30

I've been trying to install the SCO TCP/IP package on a customers 25 Mhz
Intel 386 box.  (made by Intel)

Everything links fine but when you try to boot the kernel, the machine
either locks up or reboots.  You never get anytype of message on the screen
at all!

boot:
xenix

And that is all that shows up on the screen.

I figured that if there was some sort of a conflict, it would atleast try
to boot the kernel and give some sort of message.  I've tried changing int
vector, base memory address and the port address.  No differences in how
it works.  I've even tried disabling the 64K Cache.  Again same problem.

HELP!

On a different machine (Samsung 386) this package droped right on - no
problems; at least with installation; but that's another story.

Suggestions / Comments ?

---Scott

Scott Boake                                       Palantir Systems Inc.
scott@boake2 -or- ..!uunet!pdn!boake2!scott       P.O. Box 2142
(813) 544 - 8152 (voice)                          5030 - 78th Ave North Ste. 10
(813) 544 - 2375 (fax)                            Pinellas Park, FL 34664