Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!cs.utexas.edu!uunet!ncc!atha!auvax.AthabascaU.CA!louis
From: louis@cs.AthabascaU.CA (Louis Schmittroth)
Newsgroups: comp.unix.xenix
Subject: Re: Xenix/386 v2.2.1 on a TeleVideo...Help !
Message-ID: <971@auvax.AthabascaU.CA>
Date: 2 Aug 89 15:02:31 GMT
References: <527@extro.ucc.su.oz>
Organization: Athabasca U, Alberta, Canada
Lines: 16

In article <527@extro.ucc.su.oz>, glenn@extro.ucc.su.oz (G. Geers [ext 3241]) writes:
> The hardware we have is a TeleVideo 386/16 with one floppy and a 40 Mb (type
> 14) hard disk. The configuration is set as 16 MHz cpu 5.3MHz bus video and bios
> 
> Now for the problem:
> 386 Xenix 2.2.1 doesn't boot (Boots on one of our Compaq's so the disk is ok)

Xenix does not play on the Televideo supplied controller.  You will have to
substitute a standard controller.  I had the same problem and went (at that
time) to a WD WA2, but you might want to use something faster.

Louis Schmittroth
-- 

Louis Schmittroth, Computer Science, Athabasca University
auvax!louis