Xref: utzoo sci.electronics:7394 rec.video:7497
Path: utzoo!attcan!uunet!portal!cup.portal.com!mmm
From: mmm@cup.portal.com (Mark Robert Thorson)
Newsgroups: sci.electronics,rec.video
Subject: Re: sync signal generator
Message-ID: <21216@cup.portal.com>
Date: 12 Aug 89 03:14:09 GMT
References: <89216.120136BHB3@PSUVM> <21056@cup.portal.com>
  <26659@amdcad.AMD.COM>
Organization: The Portal System (TM)
Lines: 7

If you do as Rob Warnock suggest (use a counter to drive a PROM to generate
your sync signals) you may need a reference for the TV sync signal itself.
I once got an excellent booklet on the timing of standard TV signals for
free from the local Tektronix representative.  I believe the book was called
TELEVISION BROADCAST MEASUREMENTS.  It is a book intended for the engineer
at a TV station, and tells what measurements you need to take, and how
to take them, in order to comply with FCC standards.