Path: utzoo!utgpu!watmath!att!dptg!rutgers!cs.utexas.edu!csd4.csd.uwm.edu!mailrus!accuvax.nwu.edu!tank!eecae!upba!dsndata!unocss!tdavis
From: tdavis@unocss.UUCP (Thomas Davis)
Newsgroups: comp.sys.amiga
Subject: Re: VD0 help
Message-ID: <1517@unocss.UUCP>
Date: 30 Aug 89 15:42:31 GMT
References: <935@wsu-cs.uucp> <11102@boulder.Colorado.EDU> <26766@shemp.CS.UCLA.EDU>
Distribution: na
Organization: U. of Nebraska at Omaha
Lines: 15

michael@maui.cs.ucla.edu (michael gersten) writes:

>VD0: requires the file vdisk.device to be loaded in the DEVS: directory.
>Mountlist should specify Device=vdisk.device

     You know, I tried that.  It still didn't work.  I replaced the file,
and reboot, and it works.  Now, I have an older 1000 with no halfbrite,
1 megabyte of ram at C00000 (Squeeze RAM).  I am also running ARP, so
I decided to see if that was it.  I used the 1.3 mount command; still
didn't work.  I edited the mountlist, to remove the Mount = 0 line from it,
and rebooted.  Still didn't work.  I thought to myself..  Hmmp.  The old
version still works, I'll just stick with it.


            Tom Davis