Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!sun-barr!oliveb!amdahl!dwl10 From: dwl10@uts.amdahl.com (Dave Lowrey) Newsgroups: comp.sys.amiga.tech Subject: Re: MIDI interface schematic Message-ID: Date: 28 Aug 89 15:25:55 GMT References: Reply-To: dwl10@amdahl.uts.amdahl.com (Dave Lowrey) Distribution: comp Organization: Amdahl Corporation, Houston TX Lines: 21 In article sheffler@maxwell.CS.CMU.EDU (Thomas Sheffler) writes: > >I just bought an A1000 -- so far I love it. > >I need a MIDI interface and found an old schematic for one that >someone designed -- 1 IN, 2 OUTS, 1 THRU. It consisted only of a few >hex-inverters, an opto-isolator and some resistors. I realize that >because of the Amiga's UART not a whole lot more is required, but can >this possibly be all that needed? > >Or, should I buy one somewhere? The latest Amiga Transactor (September, I believe), has MIDI interface specs for ALL Amigas. It also has specs for building a box that will split the signals comming into the box into 5 (or so) signals comming out. -- "What is another word | Dave Lowrey | [The opinions expressed MAY be for 'Thesaurus'?" | Amdahl Corp. | those of the author and are not | Houston, Texas | necessarily those of his Steven Wright | amdahl!dwl10 | employer] (`nuff said!)