Path: utzoo!attcan!uunet!ginosko!usc!ucsd!ucbvax!decwrl!claris!jazzman
From: jazzman@claris.com (Sydney R. Polk)
Newsgroups: comp.sys.apple
Subject: Re: Problems printing from AWGS to Laser
Message-ID: <10517@claris.com>
Date: 25 Aug 89 07:18:13 GMT
References: <8908222115.aa10491@SMOKE.BRL.MIL>
Organization: Claris Corporation, Santa Clara CA
Lines: 33

From article <8908222115.aa10491@SMOKE.BRL.MIL>, by V2071A@TEMPLEVM.BITNET ("George A. Piotrowski Jr."):
> I get interrupted using 4.0 by the Mac traffic on the Laser, but the
> document did print completely.
> 
> Also, my HD is an 85M Seagate ST-296-N.  It works like a charm, but I
> am having problems with the power switch.  I would probably recommend
> that anyone building their own HD should avoid the Tulin case until
> they do something about the power switch.
> 
> Does anyone at Claris have any answers??  I will try a few more things
> tomorrow with the other computers and with different fonts to see if
> I get any results.  FYI I am setting up the documents in Courier 10pt
> with a Zapf Chancery Header and a Courier Footer containing the Page
> number.
What module are you trying to print from?  How much memory do you have?  Are
you running AppleShare?

Right now we know of several problems with AWGS 1.0 and 1.0v2 with
System 5.0, not the least of which is the increased memory requirements
of system 5.0, esp. with AppleShare.  My advice is to just use system
4.0 to print if you can't get it to work with 5.0.

I really don't think the fonts you are using have anything to do with it.
System 5.0 cleaned up the problems with those.

If you would like to discuss this in detail, please continue with email.
Thanks.

-- 
Syd Polk           | Wherever you go, there you are.
jazzman@claris.com | Let the music be your light.
GO 'STROS!         | These opinions are mine.  Any resemblence to other
GO RICE!           |  opinions, real or fictitious, is purely coincidence.