Path: utzoo!attcan!utgpu!watmath!att!dptg!rutgers!cs.utexas.edu!usc!apple!dlyons
From: dlyons@Apple.COM (David Lyons)
Newsgroups: comp.sys.apple
Subject: Re: Esoniq A/D port
Message-ID: <34459@apple.Apple.COM>
Date: 31 Aug 89 00:16:55 GMT
References: <8908301858.AA21821@trout.nosc.mil>
Organization: Apple Computer Inc, Cupertino, CA
Lines: 17

In article <8908301858.AA21821@trout.nosc.mil> j_p@pro-lep.cts.com (Jason Perez) writes:
>I got a program called AFOSC from Apple2-L and it says it will take an
>input from the Esonig A/D port and show it on its oscilloscope emulator.  But
>I'm confused as to where/what is the Esoniq A/D input port.  Pleas post any
>help as I would appreciate it.

The Ensoniq connector is the 6(?)-pin one next to the Ensoniq chip, near the
front right of the motherboard (you gots to go inside the hood for this one).

 --Dave Lyons, Apple Computer, Inc.          |   DAL Systems
   AppleLink--Apple Edition: DAVE.LYONS      |   P.O. Box 875
   AppleLink--Personal Edition: Dave Lyons   |   Cupertino, CA 95015-0875
   GEnie: D.LYONS2 or DAVE.LYONS         CompuServe: 72177,3233
   Internet/BITNET:  dlyons@apple.com    UUCP:  ...!ames!apple!dlyons

   My opinions are my own, not Apple's.