Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!portal!cup.portal.com!Mike_W_Ryan
From: Mike_W_Ryan@cup.portal.com
Newsgroups: comp.sys.hp
Subject: 7962 mech
Message-ID: <21485@cup.portal.com>
Date: 21 Aug 89 00:20:08 GMT
Organization: The Portal System (TM)
Lines: 3

I have a mech from a HP7962 (130 meg). I got it from an upgrade to 
a 7963 (310 meg). Can I use this old mech for anything? Perhaps for
a Vectra RS or other system with a ESDI controller?