Xref: utzoo comp.sys.hp:2716 comp.dcom.modems:4310
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!cs.utexas.edu!uunet!mcvax!hp4nl!gufalet!ton
From: ton@gufalet.UUCP (Ton Roovers)
Newsgroups: comp.sys.hp,comp.dcom.modems
Subject: Interface speed problem with TB+ and HP-UX
Keywords: trailblazer, TB+, interface speed
Message-ID: <467@gufalet.UUCP>
Date: 22 Aug 89 08:51:34 GMT
Organization: Faculty of Arts, Groningen
Lines: 19


I just installed a Telebit Trailblazer Plus (T2500), according to the
instructions from the posting of Dennis Breckenridge in newsgroup 
comp.dcom.modems <1989Aug16.203554.3184@nebulus>. I use the modem to dial
in to our news feed hp4nl.nl
The following problem has arisen:
When I set the speed in Systems and Devices to 19200 baud, the connection is
correctly made by uucico, but the interface speed is set to 300 baud. When
I decrease the speed in Systems and Devices to 9600 baud, the interface
speed is correctly set at 9600 baud.
I am using a Hewlett-Packard HP9000/840 with HP-UX 3.1.
The HP-UX documentation says nothing about a speed restriction in Systems
entries.
Has anyone information on this?
-- 
 Ton Roovers                                                    systems manager
_______________________________________________________________________________
 Faculty of Arts and Letters, Groningen University             ton@gufalet.UUCP
 PO Box 716, NL 9700 AS Groningen, The Netherlands