Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!cs.utexas.edu!uunet!sdrc!mustard
From: mustard@sdrc.UUCP (Sandy Mustard)
Newsgroups: comp.sys.ibm.pc
Subject: Adding 2nd Hard disk to AT clone
Keywords: WD1003, MAXTOR
Message-ID: <780@sdrc.UUCP>
Date: 20 Aug 89 22:15:09 GMT
Distribution: usa
Organization: Structural Dynamics Research Corp., Cincinnati
Lines: 19


I would like to add a second hard disk to my INTEL 301 machine.
The disk is a Maxtor XT-1140.  My machine is as follows:

Intel 301 (386 16 Mhz AT Clone)
WD1003-WA2 Disk Controller
Maxtor XT-1140 140 Meg Hard Disk.
other required peripherals
DOS and UNIX SVR3 o.s.

Are there any special considerations needed to install another
Maxtor XT-1140(other than file backup)? Do I need to change
any of the jumpers on the disk controller?

Thanks for any Help.

Sandy Mustard
SDRC
mustard@sdrc