Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!sun-barr!newstop!texsun!texbell!merch!cpe!hal6000!trsvax!slimer
From: slimer@trsvax.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Seagate ST225 Help!!!
Message-ID: <216100126@trsvax>
Date: 25 Aug 89 12:54:00 GMT
Lines: 16
Nf-ID: #N:trsvax:216100126:000:720
Nf-From: trsvax.UUCP!slimer    Aug 25 07:54:00 1989




  I have a Seagate ST225 20M hard drive. Now these great drives can be put
  into IBM PC ATs I know. My question to the all-knowing net is this...

  What are the settings for the 8 jumpers found near the cable-connector
  board? I have the drive in my AT, but I receive an 1781 - disk 1 failure.
  It is a drive D. EMAIL ME!


****************************************************************************
*  Thank You,                           texbell!letni!rwsys!trsvax!slimer  *
*         Bill       "I heard it through the tape drive!" - ComputerWorld  *
*  George W. Pogue, 1300 Two Tandy, Fort Worth, TX. 76102  (817) 390-2871  *
****************************************************************************