Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!portal!cup.portal.com!Mike_G_Newman From: Mike_G_Newman@cup.portal.com Newsgroups: comp.sys.mac Subject: Zterm Message-ID: <21674@cup.portal.com> Date: 29 Aug 89 11:53:21 GMT Organization: The Portal System (TM) Lines: 42 I am attempting to use the shareware terminal program Zterm (v 0.75). While I have successfully tweaked the abundant options allowing me to communicate on line consistently, I have not been so lucky with Zmodem transfers. I am sending this message via Portal, a public access, Unix based Usenet gateway. Portal offers Zmodem file transfers. However, this works only part of the time. (I am using a Mac + with 2.5 Mb of RAM running System 6.02 with Multifinder active. I connect with Portal via PCI/Tymnet.) Sometimes, when attempting an upload to Portal the upload aborts with the message 'dte originated' from Portal. At other times, the upload seems successful, except that at its conclusion, the screen clears, the modem 'receive data' light blinks like crazy and the cursor (I-beam) flashes like crazy. The only way out of this (the modem will not respond to the normal Hayes 'hang up' command) is to 'quit' Zterm and start it up again. After the start up, everything is as it should be, with the first page of the upload on the screen with the normal Portal prompt. I can then type in 'ok' and proceed as normal. Downloads are also erratic. Sometimes they lock up the machine to the point where only a cold boot will free up the serial port. Is anyone else out there using ZTerm? with packet switching? Any clues as to what I am doing wrong? How should I have 'flow control' and the 'Zterm parms' set? Any help would be greatly appreciated as the throughput of a Zmodem transfer is about three times as great as that of Xmodem. Thanks. +-------------------------------+--------------------------------+ | Mike G Newman | mike_g_newman@cup.portal.com | | BX 1510 | MCI: mnewman (333-1196) | | Saipan MP 96950 | Phone: 670-234-7726 | +-------------------------------+--------------------------------+ PS To Portal users: I attempted to simply upload this article to the 'Phoenix' Mac sig, but kept getting messages that adding an article or collection was 'not allowed'. Wonder why...? mgn