Path: utzoo!attcan!utgpu!watmath!att!dptg!rutgers!iuvax!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: amdcad!cayman!frank@ames.arc.nasa.gov (Frank Gorishek)
Newsgroups: comp.sys.sun
Subject: NEC LC890 problems
Keywords: Hardware
Message-ID: <1040@brazos.Rice.edu>
Date: 22 Aug 89 14:16:21 GMT
Organization: Sun-Spots
Lines: 25
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 103, message 11 of 14

In sun-spots v8i92, joe@islsun5.mse.lehigh.edu (Joe Sieczkowski) writes:

| I was never able to get XON/XOFF to work proberly with my NEC LC 890
| PostScript printer.  I'm running Sun version 3.5.  It seems like the sun
| never sees the ^S from the printer.  My final solution was to set the
| printer at 1200 baud .... ie spoon feed it.
| 
...
| 
| If I even think about increasing the baud rate to 9600...the printer
| looses output.  If anyone out there knows a solution to this I would
| appreciate it.

We had the same type of problem here.  As it turns out the LC890 doesn't
drive "true RS232" (i.e., it drive +/- 5volts NOT +/- 12volts).  The
serial port on the sun just can't see anything the LC890 sends out.  We
replaced the printer, however there are such things as TTL/RS232
converters.

--frank

-- 
Frank Gorishek
frank@AMD.COM
512-462-4117 or 800-531-5202 x54117