Xref: utzoo comp.sys.amiga:38888 comp.sys.tandy:1642
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!gem.mps.ohio-state.edu!ginosko!husc6!m2c!wpi!roberts
From: roberts@wpi.wpi.edu (Barbara Hahn Roberts)
Newsgroups: comp.sys.amiga,comp.sys.tandy
Subject: Model 4 Hard DRIVE?
Message-ID: <3459@wpi.wpi.edu>
Date: 7 Aug 89 01:15:48 GMT
References: <18548@gryphon.COM>
Reply-To: roberts@wpi.wpi.edu (Barbara Hahn Roberts)
Organization: Worcester Polytechnic Institute, Worcester, MA. USA
Lines: 14

I hear its possible to connect a hard drive to a model 4. Has anyone
out there done it? If so, did you do RS way? (the $600 way), or
someother way?

I also heard that RS used to OEM a harddrive controller board from
western digital, they called it the WD1000 TB1. (long since gone I hear)

Also, how many people out there have 128k on their 4? RS wants $30 for
a single PAL for the memory upgrade.

Oh, one more question, is it true the 4's memory can be fixed to run
at 0 wait state?

Thanks for any help!