Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!peregrine!zardoz!tgate!ka3ovk!ki4pv!cdin-1!dsinc!bdgltd!ela From: ela@bdgltd.UUCP (Ed Ackerman Programmer) Newsgroups: comp.unix.xenix Subject: UUCP help, SCO 2.3 HDB dialin/dialout no good Keywords: UUCP, SCO 2.3 Xenix, dial in/dial out HELP Message-ID: <367@bdgltd.UUCP> Date: 17 Aug 89 19:26:10 GMT Distribution: na Organization: BDG Ltd., Essington, PA Lines: 15 I am trying to make a site BOTH dial in AND dial out. If the modem line is disabled then I can make calls. If the modem line is enabled I can ONLY RECEIVE calls. I thought that I could make this work both ways. I have entries in /usr/lib/uucp/Device for the dialout line : ACU Any 1200-2400 - /usr/lib/uucp/dialHA12 and I have enabled the line. I have RTFM until I am starting to memorize it. I have BOTH the Nutshell handbooks. I still cannot get this to work. HELP!!!! -- ----------------------------------------------------------------------------- Ed Ackerman | It is impossible to make anything bdgltd!ela@dsi.com or ...!dsinc!bdgltd!ela| foolproof beacause fools are #include | SO ingenious!