Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!network!sdcsvax!ucsdhub!hp-sdd!hp-pcd!hpvcfs1!johne
From: johne@hpvcfs1.HP.COM (John Eaton)
Newsgroups: sci.electronics
Subject: Re: Through-plating PCB's
Message-ID: <1430006@hpvcfs1.HP.COM>
Date: 30 Aug 89 01:54:12 GMT
References: <4003@csd4.csd.uwm.edu>
Organization: Hewlett Packard, Vancouver, WA
Lines: 10

<<<<<
> Does anyone have any techniques or ideas on how to through plate a PC board
> at home, sans expensive equiptment? ...
----------
Insert a piece of wire into the unplated hole and solder both ends.



John Eaton
!hpvcfs1!johne