Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!sun-barr!newstop!texsun!pollux!attctc!vector!telecom-gateway From: munnari!murdu.ucs.unimelb.EDU.au!darren@uunet.uu.net (Darren Wyatt Williams) Newsgroups: comp.dcom.telecom Subject: Telephone Problems With Modem Message-ID: Date: 4 Sep 89 20:56:22 GMT Sender: news@vector.Dallas.TX.US Lines: 16 Approved: telecom-request@vector.dallas.tx.us X-Submissions-To: telecom@eecs.nwu.edu X-Administrivia-To: telecom-request@vector.dallas.tx.us X-TELECOM-Digest: volume 9, issue 346, message 3 of 7 Fellow hackers, I have just purchased a netcomm 1234 automodem and have had the appropriate telephone line installed. The modem is connected to a standard IBM-compatible PC running Mirror II communications software. The problem I have arises when communicating via the modem while the phone is attached in the handset socket. No problems occur for about 10 to 15 minutes, after which the screen begins to fill with garbage. I tried out older telephones and found no problems, so the problem seems to be a fallacy of the new telecom telephones. Can anyone suggest a reason for this problem and a possible solution. Any suggestions are welcome. Thanks in advance, Darren@murdu.melb.edu