Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ulowell!cbmvax!andy
From: andy@cbmvax.UUCP (Andy Finkel)
Newsgroups: comp.sys.amiga
Subject: Re: Workbench 1.3.2
Keywords: 1.3.2 Transfer Readysoft C64 Emulator upchuck
Message-ID: <7838@cbmvax.UUCP>
Date: 6 Sep 89 02:07:47 GMT
References: <2857@mibte.UUCP>
Reply-To: andy@cbmvax.UUCP (Andy Finkel)
Organization: Commodore Technology, West Chester, PA
Lines: 25

In article <2857@mibte.UUCP> jbh@mibte.UUCP (James Harvey) writes:
>Workbench 1.3.2 causes the ReadySoft Transfer program to break.  This is 
>a utility I use quite a lot, copys to and from a C64 1541 type disk drive.  
>It took me two hours to find which of the 1.3.2 files was causing the 
>crash, it's the new SetPatch.  

Well, you don't mention what version of SetPatch you were using,
nor what 'break'ing is.

My guess is that the patch to trackdisk, which makes trackdisk
actually GiveUnit/GetUnit properly may be causing the problem.

The transfer program may not have been expecting the unit
to actually be allocated or something.

Execute was patched to use the resident list, but its hard
to see how that could be causing problems here.
-- 
andy finkel		{uunet|rutgers|amiga}!cbmvax!andy
Commodore-Amiga, Inc.

Life gets pretty complex the minute you stop mooing.

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.