Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!gryphon!pnet02!ddave
From: ddave@pnet02.gryphon.com (David Donley)
Newsgroups: comp.sys.amiga.tech
Subject: Re: toolpath wanted in workbench 1.4
Message-ID: <19512@gryphon.COM>
Date: 5 Sep 89 21:00:21 GMT
Sender: root@gryphon.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 21

rminnich@super.ORG (Ronald G Minnich) writes:
>In article <19465@gryphon.COM> ddave@pnet02.gryphon.com (David Donley) writes:
>>fnf@estinc.UUCP (Fred Fish) writes:
>>>This is not exactly related to the Amiga but here goes anyway.  This
>>>is on SCO Xenix 2.3.1, and should work on probably any Unix, including
>>>a Sun...
>>On HP-UX systems you have to be superuser to link directories.
>note that i was running as root. HP-UX, depending on the machine, is
>not a real unix derivative (i.e. the 500 series). 
>Personally, i think hard links to directorys are Evil. 
>ron

I think hard links stink too- they are just a slow crummy way of doing
alias...  HOWEVER, some nice thing in workbench to let you cluster tools in an
icon and such...  (It's in there, right?)
Well, I was talking about a 9000 series 800- I don't know about anything
else...

Never seen a "Real" AT&T unix box in my life...  I've called a VAX, but that's
not UN*X, that's slow.  Anyhow, I didn't write this, as I'd never say anything
about UN*X in an AMiga conference... :-)