Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!mit-eddie!uw-beaver!ubc-cs!alberta!idacom!danny
From: danny@idacom.UUCP (Danny Wilson)
Newsgroups: comp.sys.apollo
Subject: Apollo Floor stand
Keywords: Check the label.
Message-ID: <719@idacom.UUCP>
Date: 3 Sep 89 21:30:15 GMT
Organization: IDACOM Electronics Ltd., Edmonton, Alta.
Lines: 19

For those who have been arguing how to stand a node on its end.

The logo panel on the front of the machine (which says
'Apollo' or 'Mentor' etc, and has the leds on the it)
can have to positions.

By pushing in slightly, it is possible to rotate 90-deg to the right.
Therefore, we can assume that the node is designed to either lie flat
or have the tape drive -up-.

This example is for a DN30x0 and it is logical to assume it can 
be also applied to a DN35x0.


-- 
Danny Wilson
IDACOM Electronics		danny@idacom.uucp
Edmonton, Alberta		{att, watmath, ubc-cs}!alberta!idacom!danny
C A N A D A