Path: utzoo!attcan!uunet!wuarchive!mailrus!purdue!haven!decuac!shlump.nac.dec.com!mountn.dec.com!memit.dec.com From: shatara@memit.dec.com (Chris Shatara) Newsgroups: comp.sys.apple Subject: More Problems with GS/OS V3.0 Message-ID: <755@mountn.dec.com> Date: 2 Sep 89 21:10:08 GMT Sender: news@mountn.dec.com Organization: Digital Equipment Corporation Lines: 40 I started to run into some strange doings under GS/OS V3.0. My first problem is with Purge-o-matic. I took the suggestion that was posted here on using POM with Deluxe Paint II. This worked fine. Problem is that sometimes it doesn't. I had on several occasions encountered a "GS/OS system Error" when I use POM to start up POM or SHRConvert 2.1 I find that if I power down the system keep it off for a few seconds and then turn on the power, it will sometimes work and things are back to normal. When it fails on DP-II it also fails on SHRConv.2.1 The error message is: GS/OS SYSTEM ERROR ADDRESS = $00E284 LC BANK $0 ERROR CODE = $0002 This is for DP-II. I get a different address for SHRC 2.1 I haven't noticed whether the address is the same for different occurances. I have 1.25 M of memory, I've installed the system via the installer. I also tried setting the RAM disk setting to 0. I have an APPLE expansion memory card. The other problem I have I've already discussed in a separate topic. That is encountering an INITIALIZATION ERROR --->0201 when attempting to run DiskTimerGS. I don't know if this is related to the above problem or not. Anyone out there have any thoughts on these problems. Thanks in advance for your help.....Chris ============================================================================= | Chris Shatara | Internet: shatara@memit.dec.com | | | shatara@memit.enet.dec.com | | Opinions expressed are | DEC Easynet: memit::shatara | | mine and mine only! | UUCP: ...!decwrl!memit!shatara | =============================================================================