Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cwjcc!tut.cis.ohio-state.edu!ucbvax!NIHCU.BITNET!JDA
From: JDA@NIHCU.BITNET (Doug Ashbrook)
Newsgroups: comp.sys.apple
Subject: Re:  AppleWorks 3.0
Message-ID: <8909080928.aa24456@SMOKE.BRL.MIL>
Date: 8 Sep 89 13:26:31 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 27

Here is the response that I received from Evan to my question about
using the TimeOut QuickSpell dictionary from AppleWorks 2.0 with
AppleWorks 3.0 for building a 5.25" disk.  I thought that others in
netland might be interested.

====================================================================
J. Douglas Ashbrook                                   (301) 496-5181
BITNET: JDA@NIHCU                              <-- preferred address
INTERNET: JDA@CU.NIH.GOV     or     jda%nihcu.bitnet@cunyvm.cuny.edu
National Institutes of Health, Computer Center,   Bethesda, MD 20892

-+- Remember.  If some weirdo in a blue suit offers you some MS-DOS,
JUST SAY NO!

== Forwarded Mail ==

Date:         Thu, 07 Sep 89 16:34:08 EDT
From:         ST802148@BROWNVM
Subject:      Re:  AppleWorks 3.0

YES!!! You CAN use the Timoeout Appleworks 2.0 Quickspell Dictionary with Apple
works 3.0!!! I HAVE Tried it and it DOES work! Good question, I figured someone
 would ask it. Although, if you buy the 5 1/4" version of Appleworks 3.0, it sh
ould come with a scaled down version of the 400K, if not the original one for A
ppleworks 2.0 Quickspell. But just make sure you also have the cust.dictionary
on the same disk. You will have to do a bit of swapping, though. Hope I've help
ed.