Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!cs.utexas.edu!uunet!virtech!cpcahil
From: cpcahil@virtech.UUCP (Conor P. Cahill)
Newsgroups: comp.sys.att
Subject: Re: Disk Partitions under Sys V/386
Message-ID: <1108@virtech.UUCP>
Date: 1 Sep 89 02:55:12 GMT
References: <598@gistdev.UUCP>
Organization: Virtual Technologies Inc
Lines: 24

In article <598@gistdev.UUCP>, joe@gistdev.UUCP (Joe Brownlee) writes:
> 
> The problem seems to be that when you are installing UNIX, the installation
> software only knows about the first disk.  Since this is the case, it insists
> that /, swap, and /usr all be placed on the same disk.  You can add the second
> disk using FACE later, but you have to have the machine up under UNIX first.
> Given that placing /, swap, and /usr on the same disk is not the most efficient
> way to configure a UNIX machine, I assume that I must be missing something
> somewhere.

Why not just install the software with /usr on the  main disk, use FACE 
to format and partition the second disk, mount the second disk and copy
/usr onto the partition on the second disk, unmount the second disk,
umount /usr, mount second disk as /usr.  You would also have to modify
the /etc/fstab file to indicate the new disk partition for /usr and
you probably would want to labelit the new partition with "usr".  

After this you will have the partiton from the first disk to do 
as you wish.
-- 
+-----------------------------------------------------------------------+
| Conor P. Cahill     uunet!virtech!cpcahil      	703-430-9247	!
| Virtual Technologies Inc.,    P. O. Box 876,   Sterling, VA 22170     |
+-----------------------------------------------------------------------+