Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!ndcheg!ndmath!nstar!larry
From: larry@nstar.UUCP (Larry Snyder)
Newsgroups: comp.unix.i386
Subject: Re: com2 under 386/ix
Summary: COM2 under 386/ix
Keywords: COM2,serial, 386ix
Message-ID: <23@nstar.UUCP>
Date: 3 Sep 89 14:38:49 GMT
References: <16@nstar.UUCP> <3064@amelia.nas.nasa.gov>
Organization: The Northern Star, Notre Dame, IN USA
Lines: 22

In article <3064@amelia.nas.nasa.gov>, izen@amelia.nas.nasa.gov (Steven H. Izen) writes:
> In article <16@nstar.UUCP> Larry Snyder says
> 
> To enable COM2 I added a line to cd /etc/conf/sdevice.d/asy  to make it look
> like the following:
> 
> asy     Y       1       7       1       3       2f8     2ff     0       0
> asy     Y       1       7       1       4       3f8     3ff     0       0

Works like a champ. Thanks much.  I didn't find anything about this
in the documentation - but then we all know that the documentation is 
excellent!

My next project is to try adding multple com ports (COM3 and COM4).  First
I'll try on IRQ3 and 4 then I'll try placing them on the same IRQ (5). 

Thanks..


-- 
Larry Snyder              uucp:iuvax!ndcheg!ndmath!nstar!larry
The Northern Star Usenet Distribution Site, Notre Dame, IN USA