Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!wugate!chris
From: chris@wugate.wustl.edu (Chris Myers)
Newsgroups: comp.unix.ultrix
Subject: Re: timed on Ultrix 3.1?
Keywords: timed ds3100 pmax
Message-ID: <241@wugate.wustl.edu>
Date: 11 Sep 89 23:14:01 GMT
References: <15523@dartvax.Dartmouth.EDU>
Reply-To: chris@wugate.wustl.edu (Chris Myers)
Organization: Washington University (St. Louis)
Lines: 21

In article <15523@dartvax.Dartmouth.EDU> pete@northstar38.dartmouth.edu (Pete Schmitt) writes:
>I would like to hear from anyone regarding their success in getting
>a timed to work on ultrix. Specifically a PMAX.

I have compiled the timed from the (publically available portion of the) Tahoe
release of 4.3 BSD on my PMAXen and have not had any problems with it (in fact,
when the PMAXen are slaved to my 4.3BSD VAX the slipping clock problem with the
PMAX becomes a much less annoying problem).  It runs under Ultrix 3.0 and 3.1.

If you don't have access to the source for timed you can get both the executable
and the binaries from wuarchive.wustl.edu in

	wuarchive.wustl.edu:~ftp/fixes/ultrix.risc/*
	wuarchive.wustl.edu:~ftp/unix/4.3BSD-tahoe/etc/timed/*

Hope this helps,

Chris Myers					chris@wugate.wustl.edu
Software Engineer				       +1 314 362-6186
Office of the Network Coordinator
Washington University in St. Louis