Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!cs.utexas.edu!uunet!van-bc!rsoft!frank From: frank@rsoft.bc.ca (Frank I. Reiter) Newsgroups: comp.unix.xenix Subject: Re: lost bell, can I get it back? Message-ID: <50@rsoft.bc.ca> Date: 9 Sep 89 18:43:09 GMT References: <625@holston.UUCP> Reply-To: frank@rsoft.UUCP (Frank I. Reiter) Organization: Reiter Software Inc., British Columbia Lines: 19 In article <625@holston.UUCP> barton@holston.UUCP (Barton A. Fisk) writes: >Whenever I switch between mulitscreens in SCO at the >same moment the bell is to sound, I loose the bell forever >on all screens! > >The only way I have found to restore it is to reboot. > has no effect at this point. Eventually it will return. I don't know whether it returns with time, or whether I jsut tended to do something that fixed it after a time, but when I was experiencing this problem things would always straighten out eventually. I haven't payed much attention to it, but I don't think we are having this problem with SCO Xenix 386. -- _____________________________________________________________________________ Frank I. Reiter UUCP: {uunet,ubc-cs}!van-bc!rsoft!frank Reiter Software Inc. frank@rsoft.bc.ca, a2@mindlink.UUCP Langley, British Columbia BBS: Mind Link @ (604)533-2312, login as Guest