Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!cs.utexas.edu!oakhill!bryant
From: bryant@oakhill.UUCP (Bryant Wilder)
Newsgroups: sci.electronics
Subject: DSP56001 and data acquisition hardware
Keywords: dsp56001, data acquisition
Message-ID: <2386@oakhill.UUCP>
Date: 10 Sep 89 06:22:17 GMT
Organization: Motorola Inc. Austin, Tx
Lines: 28




>I'm looking to purchase DSP and data acquisition hardware for 
>use in an IBM PC/AT.  I have already found several companies
>that market boards suitable to my needs, but I'm sure there
>must be more.  Can anyone recommend a product(s) that meets
>my requirements (see below)?
>
>DSP requirements:
>    - based on Motorola 56001
>    - minimum 96K * 24  RAM (0 wait state)
>    - interface to PC host
>    - software support 
>
>Data Acquisition requirements:
>    - 1 channel in, 1 channel out, simultaneous operation
>    - 50KHz sampling and reconstruction rate            
>    - 12 bit resolution (linear)
>    - data transfer direct to DSP memory (not through PC host)
>
>
>Bill Warner - Electrical Engineering, University of British Columbia

call Ariel in highland park, new jersey, at 201 249-2900.  they have
what you describe above.  ask for tony agnello or mark clayton.
it uses motorola's sigma delta a/d, the DSP56ADC16, a 16 bit a/d.
bryant wilder