Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!ndcheg!ndmath!nstar!larry
From: larry@nstar.UUCP (Larry Snyder)
Newsgroups: comp.dcom.modems
Subject: Re: Need HST setup for getty
Summary: HST configuration
Message-ID: <145@nstar.UUCP>
Date: 15 Sep 89 14:21:49 GMT
References: <8909150612.AA14533@decwrl.dec.com>
Organization: The Northern Star, Notre Dame, IN
Lines: 46

> I am sorry that incoming calls setup is pretty new to me and I have
> no trouble on setting up outgoing calls for any modem.  It would be 
> nice to give me more technical informaton.   For your Xenix, just tell
> me  gettydefs, ttys, Devices, and modem setup.
> 
> Telebit is the only modem it works because I am getting excellent tech
> information.   I am still trying to install HST and Hayes 2400 and I am
> getting ring with no answer at all.
> 

/usr/lib/uucp/Devices:

ACU tty1A - D2400-19200 dialHST

/usr/lib/uucp/Dialers:

dialHST =,-, "" ATQ0E0X1\r\c OK\r ATDP\T\r\c Speed 

/etc/ttys:

0ntty1a

/etc/gettydefs:

k # B2400 HUPCL # B2400 CS8 SANE HUPCL TAB3 IXANY #\r\nWelcome to the Northern Star!\r\ntype bbs or your account name\r\nlogin: # n 

n # EXTA  HUPCL # EXTA  CS8 SANE HUPCL TAB3 IXANY #\r\nWelcome to the Northern Star!\r\ntype bbs or your account name\r\nlogin: # k

NRAM setting for HST (14.4 kbaud) (hang on - I'm still trying to
figure out how to dump the screen to a file using ProYam):

DIAL=PULSE B1 F1 M1 X1
BAUD=19200 PARITY=N WORDLEN=8

&A0 &B1 &G0 &H1 &I0 &J0 &K1 &L0
&M4 &N0 &P0 &R2 &S0 &X1 &Y1


Hope this helps (I was never able to figure out how to get ProYam
to do an entire screen dump - the docs say ALT-Z but I can't find
the file it creates!).
-- 
Larry Snyder                                              SCO Xenix 2.3.2 '386
uucp: iuvax!ndcheg!ndmath!nstar!larry                Computone Intelliport AT8
The Northern Star Usenet Distribution Site                    HST / PEP / V.22
Notre Dame, Indiana USA                            Home of the fighting Irish!