Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!gem.mps.ohio-state.edu!wuarchive!cs.utexas.edu!uunet!van-bc!sl
From: sl@van-bc.UUCP (Stuart Lynne)
Newsgroups: comp.dcom.modems
Subject: Re: New "Alternate Connector For Use With ANSI/EIA-232-D"
Message-ID: <287@van-bc.UUCP>
Date: 19 Sep 89 07:01:33 GMT
References: <870.251007A2@zswamp.fidonet.org> <328@gp.govt.nz> <8539@hoptoad.uucp>
Reply-To: sl@van-bc.UUCP (Stuart Lynne)
Organization: Wimsey Associates
Lines: 20

In article <8539@hoptoad.uucp> gnu@hoptoad.uucp (John Gilmore) writes:
>The standards bogons are at it again.

Looks good, but can we have hardware flow control? Please.

}Draft signal spec:
}
}	GND
}	TX Data
}	RX Data
}	I'm Here (DTR)
}	You're Here (DSR/CD)
}	TX Clock (synchronous modems and flow control)
}	RX Clock (synchronous modems and flow control)
}	+5V, fused and current-limited
	You can Send
	I can Send

-- 
Stuart.Lynne@wimsey.bc.ca uunet!van-bc!sl 604-937-7532(voice) 604-939-4768(fax)