Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!texbell!vector!telecom-gateway From: stiatl!tom@gatech.edu (Tom Wiencko) Newsgroups: comp.dcom.telecom Subject: Re: DTMF Terminals? Message-ID: Date: 14 Sep 89 15:13:56 GMT Sender: news@vector.Dallas.TX.US Reply-To: Tom Wiencko Organization: Wiencko & Associates, Inc. Lines: 27 Approved: telecom-request@vector.dallas.tx.us X-Submissions-To: telecom@eecs.nwu.edu X-Administrivia-To: telecom-request@vector.dallas.tx.us X-TELECOM-Digest: volume 9, issue 376, message 6 of 6 In article sr16+@andrew.cmu.edu (Seth Benjamin Rothenberg) writes: >>X-TELECOM-Digest: volume 9, issue 370, message 3 of 10 >>My bank offers bank-by-phone, where a synthesizer and a DTMF detector >>make up a terminal. >>Does anyone know what they are and the names of some manufacturers? I >>would really be interested in multiport devices, though single-port >>(as would be used with a PC) would be helpful. Dialogic Corporation makes some dandy little boards which hook up to PC or compatible devices. They have several different kinds of boards, with different numbers of lines available (we used the 4 line D40 boards and liked them a lot). If you really wanted to get fancy, you could plug a whole slew of them into a single PC - up to six boards if I remember right. They also had a little cross-connect switch board which you could hook up in front of the telephone boards which would give you the capability of building a little baby PBX if you really wanted to. I don't have their number and address handy, but can dig it up if you need it. Tom Wiencko (w) (404) 977-4515 gatech!stiatl!tom Wiencko & Associates, Inc.