Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!deimos.cis.ksu.edu!Intrepid!kfellens
From: kfellens@Intrepid.ece.ukans.edu (Keith Fellenstein)
Newsgroups: comp.periphs
Subject: Re: OMTI controller and HD
Summary: Settings for ST-251
Keywords: HD, OMTI
Message-ID: <432@Intrepid.ece.ukans.edu>
Date: 20 Sep 89 20:39:58 GMT
References: <1023@maestro.htsa.aha.nl>
Reply-To: kfellens@Intrepid.UUCP (Keith Fellenstein)
Organization: The University of Kansas
Lines: 8


There are no direct settings for the ST-251 in the 5520A booklet I found,
but the settings for the ST-277R would appear to work, they list the same
number of cylinders and heads.  Try W1 off, W2 on, W3 on, and W4 off.  You
could also go through debug, g=c800:6 and answer no to the "use defaults"
question, that would let you enter cylinders and heads directly.

Keith