Xref: utzoo comp.sys.amiga:39960 comp.sys.amiga.tech:7078
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ncar!boulder!tramp!hunt
From: hunt@tramp.Colorado.EDU (Lee Cameron Hunt)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Bizarre problem with Mitsubishi multisync monitor
Message-ID: <11574@boulder.Colorado.EDU>
Date: 12 Sep 89 03:48:32 GMT
Sender: news@boulder.Colorado.EDU
Reply-To: hunt@tramp.Colorado.EDU (Lee Cameron Hunt)
Distribution: na
Organization: University of Colorado, Boulder
Lines: 15


I just received a Mitsubishi Dimond Scan multisync monitor (AUM-1381A) and
it doesn't work too well with my Amiga 2000.  I have a stock 2000 with a
HardFrame 2000 SCSI board.  The machine will not boot or reboot with the
monitor cable plugged in.  Actually, the machine will not boot when the
R, G, B, Hsync, or Vsync lines are connected (the ground lines don't
matter).  But, if I boot or reboot with the aformentioned lines disconnected
and then connect then, things work fine.

Very strange.

Any suggestions.

--Lee
(...!ncar!boulder!spot!hunt)